Showring Trench Boxes & Pilling fabrication

STEEL FABRICATION

Age Steel trading is specialized in Trench Boxes & Pilling fabrication:

Trench Boxes are different from shoring because, instead of shoring up or otherwise supporting the trench face, they are intended primarily to protect workers from cave-ins and similar incidents. The excavated area between the outside of the trench box and the face of the trench should be as small as possible. The space between the trench boxes and the excavation side are backfilled to prevent lateral movement of the box. Shields may not be subjected to loads exceeding those which the system was designed to withstand.

Available Sizes

FOR HAVE DUTE BOX 100MM THK

  • 4 MTR * 1.2MTR
  • 4MTR * 1.6MTR
  • 4MTR * 2MTR
  • 4MTR *2.5MTR
  • 4MTR*3MTR
  • 4MTR*3.5MTR
  • 4MTR*4MTR

DUBEL SLIDING RILL
FOR LOW DUTE 50MM THK

  • 3MTR*3MTR
  • 4MTR*2.4MTR

 

Sheet piles